| |
 |
Coaxial Cable Twist Pair Series |
|
|
|
|
RS232 / RS485 Series |
|
|
|
|
PoE Series |
|
|
|
|
Multipoint Series |
|
|
|
|
|
|
| |
|
PMC100 Media Converter Series |
PMC100-1(Twisted Pair) |
PMC100-2(Coaxial cable) |
|
|
|
|
Media Converter (PMC100) is the latest broadband wiring technology, which may thoroughly solve IP cameras' troublesome wiring problems. PMC100 enables to cabling the IP surveillance fast, and Save the cost.
PMC100 can use coaxial cable or phone line (Twisted Pair) as the transmission medium. Therefore, for those areas having existed wires (original analog surveillance), as long as installing PMC100, there is no requirement for camera transmission wires or re-wiring. Regarding to system integrators, it not only makes wiring more convenient, but saves time and cost. PMC100 is the best solution for system integrators (SI). |
 Features
| PMC100 Broadband Wiring Application |
PMC100 wiring is simple. As long as installing PMC100 separately to the IP cameras and the monitoring center, images data will be transmitted from IP cameras to monitor center. |
Cost effective
|
| PMC provides the advantage of low cost in physical layer design of network surveillance and management. The reason for such design reducing the required cost is that the video & audio transmission is done via the legacy coaxial cable or telephone line. Thus, installation of PMC is quite straightforward and cost effective on cabling; no additional cables are required. |
Simple Installation
|
| No software/driver installation is required; simply plug and ply. It is compatible with any network protocol. PMCs are applied in pairs. Each PMC has one connection to its opposite PMC and the other connection (RJ45) to the network devices. Therefore, by bridging an existed connection, it is just as straight RJ45 to RJ45 connection. No MAC or IP address is required to set for PMC. |
Distance and bandwidth
|
| Measuring by the official bandwidth meter, Smart Bits, PMC in the transmission distance of 1.5KM (1500 meters) can still keep in 25 ~ 30 Mbps. Upon this condition, the bandwidth is plenty for video transmission of 8 IP cameras (calculated by 3 Mbps bandwidth required for each camera). In addition, as the plenty of bandwidth it also supports the transferring of high definition television (HDTV) signal which is applicable to those video & audio service providers. |
Environmental application
|
| By applying the existed cables, PMC can meet the requirements of interference-resistant (tunnels, lifts) or distancing (countryside, villages, bridges). Furthermore, the RS485 compliant model can integrate with the functions of fire, entrance, alarm, control management and etc. |
IP cam with Ethernet cable
 |
Transmission distance is limited, up to 100 meters. |
|
Ethernet cable is improbable for outdoor usage. |
IP cam with PMC
|
Transmission distance can be extended over 1 KM. |
|
Broad band (100Mbps) can support for multiple IP cams input. |
|
Telephone line / coaxial can be more probable for outdoor usage. |
Specifications
|
PMC100-1 |
PMC100-2 |
| Dimension |
126(W)*95(D)*30(H)(mm) |
126(W)*95(D)*30(H)(mm) |
| Weight |
311±5g |
311±5g |
| LED Indicators |
Green-PW for power
Green-CPE/CO
Green-Link for data link |
| Power Consumption |
Max. 4.2W 5V 2A DC |
Max. 4.2W 5V 2A DC |
| Ethernet |
10/100 |
10/100 |
| I/O |
Terminal block for phone line / RJ-45 |
BNC 75 ohm connector / RJ-45 |
| Transmission rate and distance |
94Mbps/200m |
94Mbps/200m |
| Features |
Long Distance
2.High BW |
1.Analogue cam Upgrade |
| Application |
Road/Bridge |
Airport/society/ Community/museum |
|
|
|
